Olivewood Rough Sawn Composite #1955 Wood Veneer 5.5" x 7.5" raw no Backer 1/42"

Olivewood Rough Sawn Textured composite # 1955/005 wood veneer 5.5" across grain x 7.5" with grain with no backer 1/42" thickness. Composite wood veneer is just like any other wood veneer as far as laminating and finishing. It is real wood that is engineered and designed for consistent color and grain appearance. This product has a rough cut texture to it. Very unique and pretty! Ships flat in between thick cardboard. Code # 1955 and 005. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. Other sizes and backed products may be available. About pictures : Most pictures have been temporarily wet with denatured alcohol on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments may have been made to show the color as true as possible. A lot of time and effort is spent on picturing accurately. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply :

• Brand: Olivewood # 1955 composite wood veneer raw sample, Veneer Type: Raw
• Model: Olivewood recon engineered reconstituted thin
• Veneer Cut: Plain Sliced
• Item Type: Veneer Sheet