Honeywell HPF-PS6 6 Firelite Honeywell NAC 6 Amp Power Supply. Replaces FL-PS6

HPF-PS-6 Remote Power Supply - The PS Series 6A remote power supply with battery charger and 5 configurable outputs, gives A&Es, dealers, installers and end users more flexible and efficient options for meeting today’s installation, set-up and servicing needs for power supplies. The PS series power supplies provides more power and higher number of inputs and output circuits with the flexibility to pair any input with any output and the ability to convert from Class B to Class A circuits by adding a ZNAC card without losing any circuits (unlike competition where class B to A conversion reduces your circuits by half). Each circuit can be individually programmed (using DIP switches) to be a NAC output, can used for resettable aux power, non resettable aux power or door holder power. This provides unprecedented flexibility in system design. PS series supports SSD, wheelock, Gentec and Amseco sync protocol and it is UL listed to provide synchronized cascade upto 4 levels deep (unlike competition who provides upto 3) and through different configuration you may have upto 40 powersupplies in sync or upto 400A power. This helps to provide synchronized power expansion for larger applications. The PS series is equipped with 3 system health LED indicators (Power, Batt/Chgr Fault, and Ground Fault). In addition each available output circuit also has 2 status LEDs - output status and trouble. The trouble LEDs flash in different blink patterns to indicate type of trouble such as open or short circuit. This allows faster diagnostics by pinpointing problematic areas and reason quickly. It also has “Display trouble history mode” which shows past history of troubles on the system A removable door in PS series gives better access to wire up the unit, especially in tight spaces allowing reduced installation time and more knockouts provides more flexibility in cabling. PS series accepts a wide range for EOL resistor values (2kohms to 27kohms) which means installers no longer have to

• Up to five independently- configurable, power-limited output circuits for: – Class B and/or Class A NACs – Class B and/or Class A resettable or non-resettable 24V auxiliary power – door holder power
• Up to five independently- configurable, power-limited output circuits for: – Class B and/or Class A NACs – Class B and/or Class A resettable or non-resettable 24V auxiliary power – door holder power